The 744D is our most advanced MyLock mechanical serger, with speeds up to 1300 stitches per minute. It features electronic control, a handy needle threader, and an easy Upper Knife release. An instructional video ensures that you'll be serging with professional results in no time.

The 744D is a free-arm serger. Previously available only on our sewing machines, the free-arm allows you to serge in tight places like cuffs and collars with ease. For instance, to attach a sleeve to a garment, you simply slip the turned out sleeve and arm over the free-arm and serge.

The 744D has 2 needles and 2, 3 or 4 thread stitching capabilities. It's equipped with a differential feed (adjustable from .05 to 2.25) and an adjustable cutting width. This provides increased control for handling most types of fabrics and is essential for creative serger techniques.

Threading is simplified by color-coded thread guides and a self-threading lower looper. Simply lay the thread into the guide, flip a switch, and the lower looper is threaded. The guide is automatically returned to its normal position when you turn the balance wheel. And when you lift the presser foot for rethreading, the thread tensions are automatically released so you can draw the thread smoothly.

A lower looper pre-tension control eliminates the need to change tension for most rolled hems. You can also switch quickly to rolled hemming without changing the needle plate.

The MyLock 744D with its free-arm and other advanced features, is the easiest way to get fast, professional results.

• Threaded With 4 Spools of Thread
• Standard Serger Foot
• Needle Plate (standard)
• Needle Threader
• Spool Nets (4)
• Spool Caps (4)
• Upper Knife (1)
• Spreader
• Screwdriver (L, S)
• Tweezers
• Lint Brush
• Spanner
• Attaching plate
• Oil
• Set of Needles
• Accessory Box
• Waste Chip Box
• Speed Controller
• Instraction Book

Please note that the PDF may
take awhile to load depending
on the speed of your computer.